Polymer Melt Filter Elements, Candle Filters, Filter Housing and Cartridges and Filter Fittings. Forms Including: Pleated Filter Elements, Pipe Filter Elements, Extruded Screen Packs, Filter Discs, Leafs, Baskets, Bags and etc. For filtering of air, gas, oil, grease, liquid and fuel.......

Cylindrical & Conical Air Filter For Power Station Gas Turbine and Generator Intake

We supply Cylindrical & Conical Air Filter For Power Station Gas Turbine and Generator Intake, made of synthetic mateial, pleated into cylinder or cone shape to suit a variety of industrial designs. The pleated synthetic air filters are complete with gasket and liners.

Cylindrical Air Filter Pleated for Gas Turbine

Technical Specifications

Cylindrical & Conical Air Filter For Power Station Gas Turbine and Generator
Description of Gas Turbine below:

Generator Unit Type EFLA-K
Gas turbine Model Series (GE Design) MS-6001 B
Name of Manufacturer Hitachi, Japan
No. of turbine stages 3
No. of Compressor stages 17 (Axial)
Base Output 35700 KW At 40°C Peak load,
Type of Operation Continuous
Compressor Inlet Temperature 35°C
Turbine Exhaust Temperature 551°C
Control Mark-vi Speedtronic

Unit, Place and condition where air filter to be used:

Unit: 100MW, PG 9171 E, GE ENERGY PRODUCTS- EUROPE
Total air flow of the unit (ton/hr): 1458 Ton/Hr
Total filtration area: For turbine: 1900 Sq. ft. For Generator: 317 Sq. ft.
Temperature range: +05 to +45 °C
Weather Condition: Tropical High humidity (90%) Rainy, Dirty, Foggy & Dusty Ground, Insects, Flies & Mosquitoes.
Place of Use: Turbine & Generator Intake
Type of Filter: Pulse - cleaning filter (cylindrical & conical)
Number of stages: Single stage
Type of dust: Dry, Moisture, corrosive Sooty-Oily & Erosive.

 Air Filters comply with following Technical Specifications:
Cylindrical & Conical Filter:

Item Specification
Filter Media Synthetic
Filter Media Grade FA-301/EN 7.1.301.
Thickness 0.013 Inch
End Cap Material Galvanized G.l. Sheet (SPGP) with Filter Media potted in Plastisol to ensure leak free seal.
Element Shape Cylinder  
Cone  
Size Dimension: Large
end(OD) 		Small
end(OD) 		Length ID
Cylinder: 324mm 324mm 660mm 212mm
Cone: 445mm 324mm 660mm 331/213mm
Air Flow Capacity For Cylindrical: Max. 650 CFM & for Conical: Max. 850 CFM.
Initial Pressure Drop 1.0" W.C. across the Filter Element.
Collapse Pressure 30" W.C.
Bust Strength 25 psi
SAE fine dust holding capacity 4940 gms at 4" W.C.

Test results comply with the following Test result.

Pleat Depth 50 mm + 1.0 mm
No. of Pleats 300 + 2 inch deep pleats held in place with Rotary Pleater for Cylindrical air filter, 355 + 2 deep pleats held in place with Rotary Pleater for Conical filter.
Gasket Materials Seamless Polyurethane
Gasket Size Filter Type Cylindrical Conical
Inner Diameter 257.14 mm 405/222 mm
Outer Diameter 276.46 mm 420/241 mm
Height 12.7 mm 12.7 mm
Liners Galvanized expanded metal with 72% open area.
Spiral Beading on Filter Elements. Filter media with liners are fixed with Hot melt spiral beading on inside & outside of filter elements to ensure rigidity & media pack geometry.
Count Efficiency 99.99+% on 0.44 micron & larger particles.