Polymer Melt Filter Elements, Candle Filters, Filter Housing and Cartridges and Filter Fittings. Forms Including: Pleated Filter Elements, Pipe Filter Elements, Extruded Screen Packs, Filter Discs, Leafs, Baskets, Bags and etc. For filtering of air, gas, oil, grease, liquid and fuel.......

PP Yarn Wound Filter Cartridge

PP cartridge filters elements
Material: SUS304
Filter mesh type: Micron
Technical specification:

Parameter   Unit   Specification
Type Yarn wound
Nominal filter rating micron 5.0
Specific flow rate m3/m2.h 14
Operation data:
Operating pressure barg 24.14
Max. allowable operating pressure barg 32
Max. operating temperature °C 80
Differential pressure:
Initial bar <0.2
Max. operation bar 1.5
Dimensions:
outside diameter mm 63
Length mm 1524
Inside core diameter mm 34
Area of each cartridge filter element m2 0.30
Total area of filters in each vessel m2 42.85
Material:
Yarn PP
Core S.S
Nuts S.S
Mode of installation:
Top (Threaded Type,1-5/16 11G，2 Nuts， 3mm gasket one) Stainless steel end pipe with 1 inch pipe threaded and 2 nuts and gaskets in cartridge plate with ~ 40mm thickness and 1 washer.
Bottom (Threaded Type:M8, 3 Nuts, 2 gaskets) Closed cap with 8mm threaded bolt with   3 nuts for bracing with steel bands and     2 washer.
Backwash conditions:
Air Dry and oil free, 5.5barg pressure
Water Condensate from condensate storage tank